super304h, steel,Hot sell super304h, MS Plates stock in China,China super304h, MS Plates factory. Keeps more than 10,000 tons hot rolled and cold rolled super304h, MS Plates in stock each month. We can meet our customer's any quantity request. Based on these stock source, our advantage industry spread into steel process like : cutting ( any size and any shape ) drilling, welding, milling, machining and steel structure. We also have a high quality logistics team who make sure the fast delivery time and shipment. Anyway, if you want to find super304h, MS Plates plate/sheet bar supplier, super304h, MS Plates plate/sheet bar manufacturer, super304h, MS Plates plate/sheet bar exporter, please contact steel's sales team. We will give you the super304h, MS Plates plate/sheet bar competitive price, super304h, MS Plates plate/sheet bar good quality and best service from us.

Mechanical Properties

Nippon Steel & Sumitomo Metal

Weld joint of SUPER304H tube, using matching welding consumable, has enough mechanical properties, including creep rupture strength, even in welding condition without control of interpass temperature.

OCTG · Download Area · Line Pipe · Our Company · Application List · Contact Us

P008en Seamless Steel Tubes and Pipes for Boilers

Pipe Products Seamless Steel Tubes and Pipes for Boilers NIPPON STEEL & SUMITOMO METAL nssmc/ 2-6-1 Marunouchi, Chiyoda-ku,Tokyo 100-8071 Japan

Microstructures and mechanical properties of

Microstructures and mechanical properties of T92/Super304H dissimilar steel weld joints after high-temperature ageing. Unfortunately, study on the effect of high-temperature ageing on the microstructures and mechanical properties of the T92/Super304H weld joints has not been reported till now, to the authors’ knowledge.

Studies on Stress Corrosion Cracking of Super 304H

Stress corrosion cracking (SCC) is a common mode of failure encountered in boiler components especially in austenitic stainless steel tubes at high temperature and in chloride-rich water environment. Recently, a new type of austenitic stainless steels called Super304H stainless steel, containing 3%

Structure and properties of Super 304H steel for pressure

Structure and properties of Super 304H steel for pressure elements of boilers with ultra-supercritical parameters. to required utility properties of Super304H austenitic steel for operation at

Published in: Journal of achievements in materials and manufacturing engineering · 2012Authors: A ZielinskiAbout: Creep

Microstructure Evolution of a Novel Super304H Steel

Microstructure Evolution of a Novel Super304H Steel Aged at High Temperatures Xin-mei Li 1, Yong Zou;*, Zhong-wen Zhang2 and Zeng-da Zou1 1Key Lab of Liquid Structure and Heredity of Materials, Ministry of Education, Shandong University, Jinan 250061, P. R. China 2Shandong Electric Power Research Institute, Jinan 250002, P. R. China

The negative effect of high-intensity shot-peening on the

The Super304H tube with a dimension of Φ45 × 9 mm was homogenized at 1150 ℃ for 30 min and water quenched to ambient temperature. The specimens for SP treatment, with dimensions of 50 × 30 × 4 mm, were cut from the Super304H tube and ground successively to 1200 grit emery paper.


TG-Super304H all weld metal are shown in Table 3 and Figure 2. The typical creep rupture characteristics of SUPER304H steel tubes are also shown in Figure 2 for reference. Butt joint welding was conducted with PREMIARC TG-Super304H wire and SUPER304H steel tube according to the welding conditions listed in Table 4.

Tube/Pipe super304 S30432 Super304H(NSSMC) -

Foreign Commercial Grade:Super304H NSSMC Super 304,boiler tubes. Austenitic stainless steel's resistance to general corrosion,good weldabilityhelp the designer to use them to produce boiler and heat exchanger.It is the most widely used for heat transferring tubing.We supply the most grades of tubes with perfect quality,and value-added

Long term creep properties and microstructure of SUPER304H

The longest creep rupture tests performed to date (600°C for 85 426 h for SUPER304H; 700°C for 55 858 h for TP347HFG) showed that the stable strength and microstructure were retained, with very little formation of σ-phase compared with conventional austenitic stainless steels and no other brittle phases.

Steady-State Creep Behavior of Super304H Austenitic Steel

Creep behavior of Super304H austenitic steel has been investigated at elevated temperatures of 923–973 K and at applied stress of 190–210 MPa.

Precipitation Kinetics of M23C6 Carbides in the

Super304H steel (Ref 16), since the precipitation mechanism of M 23C 6 phase in the TP304H steel has been extensively investigated (Ref 17, 18). However, there are great discrepan-cies between Super304H and TP304H steels because of their different precipitated phases. For example, B. Sasmal (Ref 19) revealed that M 23C

Stainless Steel Tubing,NickelAlloy,Ti& Copper Alloy Tubing

The Comments of Super304H Stainless Steel Boiler Tube. Austenitic steel Super 304H used for ultra-Supercritical boiler has been developed for ultra-Supercritical boiler tube application, it’s inoxidibility at 650℃ is better than common 18/28 stainless steel such as SA213 TP304H,SA213 TP347H and at the samec condition. it’ s depth of oxide

Copper in Super304H Heat Resistant Steel - Harry

Super304H chemistry specification), in order to achieve a better property. 4. Conclusions (1) The copper addition enhances the creep rupture strength of Super304H steel. When the copper content is about 4%, the steel is of higher creep rupture strength and better elongation value as well.

Microstructure and phases of deposited metal of SUPER304H

Super304H steel is widely used in the boiler superheater and reheater 3. The main problems in Super304H steel welding are the hot cracking, corrosion and aging embrittlement 4,5. The welding

Nital Etch, 5%, 250 mL | Etchant Store

5% Nital Etch is a common metallographic etchant for etching mild steels, low alloy carbon steels, cast irons and some tool steels. It can also be used for temper inspection (Nital etch test) and weld inspection of carbon steels. The ASTM E 407 designation of this etchant is 74 Nital.

Strengthening and degradation mechanisms in

Strengthening and degradation mechanisms in austenitic stainless steels at elevated temperature . MUHAMMAD FAROOQ . Doctoral Thesis . Stockholm 2013 . Department of Materials Science and Engineering . Royal Institute of Technology (KTH) SE-100 44 Stockholm, Sweden

SA-213/ SUPER304H /S30432 Austenite Stainless Steel

SA-213/ SUPER304H /S30432 Austenite Stainless Steel Seamless Pipe. Boilers include domestic boilers, general industry boilers, locomotive boilers and thermal electric generation boilers.

High end stainless and nickel alloy seamless tubes for

Original steel grades, SUPER304H®,TP347HFG,and HR3C have been registered according to major world standards. Over 120,000 metric tons of tubes have been produced by NSSMC, and have been used in twenty-two USC power plant boilers in Japan, as well as in more than 200 boilers outside Japan.

Technical Report UDC 669 . 14 . 018 . 85 : 621 . 311 . 22

boiler tubes and pipes that are marketed as SUPER304H®, SUS304J1HTB, ASME SA213 Code Case (CC) 2328 and TP347HFG (ASME SA213 TP347HFG), which have become world standard,4) and in this way the company has contributed much to the development of

An Investigation on Precipitation Behaviour of Cu-Rich

Super304H, a Cu-containing 18Cr-9Ni-3CuNbN heat-resisting steel is wildly used as an superheater/reheater tube material for ultra-super-critical (USC) power plants all over the world.

Nippon Steel & Sumitomo Metal

Table Nominal composition of matching welding consumable for SUPER304H [mass%]. Table Tensile test result of weldment. Fig. Creep rupture test results of welded joint. Weld joint of TP347HFG tube, using matching welding consumable developed for SUPER304H, has enough mechanical properties, including creep rupture strength.

SA213-SUPER304H和SA213-SUPER304hH-SB区别? - 知乎

Translate this page

sa213-super304h和sa213-super304hh-sb这两种不锈钢有什么区别? 显示全部

3 7 -

AD-A23 7 931 MICROSTRUCTURAL DEVELOPMENT IN HSLA-100 STEEL WELD METALS A*.t - AI* Final Report Grant No. N00014-89-J-1958 -. .o, Submitted by j Paul R. Howell

Solid solution strengthening effect on creep strength

Solid solution strengthening effect on creep strength of austenitic stainless steel Sara Abouzari Department of Material Science and Engineering Royal Institute of Technology Stockholm 2012-03-14 Master of Science Thesis Supervisor: Rolf Sanström KTH

Trial Production of Super304H Tubes for Supercritical

The melting process,cold working and solid solution for Super304H tubes were investigated.The results showed that S content in steel could be lower than 0.005% by

Welding defects of SUPER304H steel and their

SUPER304H is expected to generate hot crack in the weld if the heat input was not well controlled or the interlayer temperature was inappropriate, as illustrated in Figure 1 and Figure 2.

SUPER304H Trademark - Serial Number 79093889 :: Justia

SUPER304H - Trademark Details. Status: 602 - Abandoned-Failure To Respond Or Late Response. Serial Number. 79093889. Word Mark. SUPER304H. Status. 602 - Abandoned-Failure To Respond Or Late Response. Status Date. 2011-11-04. Filing Date. 2011-01-14. Mark Drawing. 4000 - Standard character mark Typeset.

Advanced gas turbines need advanced HRSGs - Modern

The Super304H selected for the Bouchain HRSG superheater and reheater tubes includes Nb for stabilisation and special heat treatment. It has high strength and good resistance to steam oxidation and stress relaxation cracking.


OXIDATION BEHAVIOUR OF AUSTENITIC STAINLESS STEELS AT HIGH TEMPERATURE IN SUPERCRITICAL PLANT . by . HENRY GEORGE SIMMS . A thesis submitted to . The University of Birmingham . For the degree of . MASTER OF RESEARCH . School of Metallurgy and Materials Engineering . College of Engineering and Physical Science .

Alloy 304/304H Austenitic Stainless Steel Plate

Alloy 304/304H (UNS S30400/ S30409) is a modification of the most widely utilized "18-8" chromium-nickel austenitic stainless steel. The carbon content is controlled in the range of 0.04-0.10% for increased strength at temperatures above 800°F (427°C).

Introduction of Korean 1000MW USC Boiler - IPS 2018

I General Introduction of Doosan Boiler CONTENTS II Doosan USC Boiler Design Features . 2 License Agreement of Alstom’s Boiler Tech. License Agreement of Sulzer’s Once- Primary SA213T23 / T91 / T92 / Super304H Secondary SA213T91 / T92 / Shot blasted Super304H / HR3C Third Shot blasted Super304H / HR3C 4 Reheater

Safety Data Sheet - Oxford Alloys, INC

Safety Data Sheet 1/1/2017 EN (English) 5/8 Decomposition products of normal operation include those originating from the volatilization, reaction or oxidation of the materials shown in

Effect of Fast Multiple Rotation Rolling on the Oxidation

the oxidation resistance of Super304H stainless steel. This paper is mainly focused on the effect of FMRR on the oxidation behavior of Super304H stainless steel in the temperature range of 550–750 C for 25 h in water vapor ambient. Oxidation dynamics as well as the constituents and microstructures

Research on Microstructure Transformation of Super304H

To study microstructure transformation of Super304H, the original sample and the samples aging for 500h, 800h, 1500h, 2500h and 3650h at 700 were analyzed with OM, SEM, TEM and X

Materials | November 2018 - Browse Articles

Solution-treated Super304H austenitic steel samples containing a few primary carbonitrides were aged at 923 K for 5000 h. The results show that the primary carbonitrides in the Super304H steel are non-stoichiometric compounds enriched in Nb and with a NaCl-type structure.

Intergranular corrosion susceptibility of a - DeepDyve

Read "Intergranular corrosion susceptibility of a novel Super304H stainless steel, Engineering Failure Analysis" on DeepDyve, the largest online rental service for scholarly research with thousands of academic publications available at your fingertips.

Published in: Engineering Failure Analysis · 2012Authors: Yan Gao · Chunlei Zhang · Xiahua Xiong · Zhijun Zheng · Min ZhuAffiliation: South China University of Technology · Electric Power Research InstituteAbout: Superheater

Welding Consumables for Coal-fired Power Plant

Welding Consumables Tensile properties Chemical composition (wt.%) Applicable Parent Material (ASTM) Test temp. YS (MPa) TS (MPa) EL (%) C Si Mn P S Ni Cr Cu Mo Nb N NSSW YT-304H 3) RT 500 650 35 0.10 0.3 3.2 .001.004 16 18 3 0.9 0.6 0.2 Super304H 1) (S30432) NSSW YT-HR3C RT 560 790 32 0.06 0.31.5 .003.005 20 27 3 0

Diffusion Kinetics of Chromium in a Novel Super304H

Abstract Diffusion behavior and diffusion kinetics of chromium (Cr) from the pure chromium coating in the matrix of Super304H and TP304H steels were investigated in a temperature range of 600-900 ℃ by using energy-dispersive spectrum (EDS) quantitative line scanning and Fick's second law of diffusion.

Precipitation Study in a High Temperature Austenitic

ROYAL INSTITUTE OF TECHNOLOGY Precipitation Study in a High Temperature Austenitic Stainless Steel using Low Voltage Energy Dispersive X-ray Spectroscopy

High-temperature tensile and creep deformation of cross

The high-temperature mechanical behavior of cross-weld specimens prepared from a dissimilar weld joint between T92 martensitic and Super304H austenitic heat-resistant steels incorporating Ni-based weld metal was evaluated at temperatures up to 650°C.

Development of Technologies for Improving Efficiency

Development of Technologies for Improving Efficiency of Large Coal-fired Thermal Power Plants 368 The success of the Torrevaldaliga Nord project was an important step toward the development of header and pipes and SUPER304H (18% Cr steel) for heat exchange tubes—the development of new

Aris Blankenspoor - EVOLEN

Super304H . 16Mo3 Super304H HR3C 13CrMo4-5 . X20 CrMoV 11- 1 7CrMoVTiB10-10 Quelle: HPE . Maasvlakte: a history of land and water . Maasvlakte 1 (1970) E.ON E.ON . Maasvlakte is one . of the best options in Europe for a coal . fired power plant . Maasvlakte 2 (2012)

The Role of Fireside Corrosion on Boiler Tube Failures, Part I

Normal 0 0 1 2808 16009 133 32 19660 11.0. 0. 0 0. One of the primary challenges of reliably burning coal is managing the corrosion experienced by the furnace heat transfer surfaces.

Kobelco Welding Today Special Edition

– Austenitic stainless steel TIG wire for coal-fired steam boilers: TG-Super304H – 7% and 9% Ni steel welding consumables for LNG storage tanks – APPENDIX 1. About stainless steel – APPENDIX 2. Welding of stainless steels. Mild steel and 490MPa HT steel.

Arcnova300 Dc Arc Welder Secondary Converter For All

It can realize the welding of cellulose, common low-carbon steel, stainless steel and other welding consumables, especially suitable for the welding of USC (ultra-supercritical boiler) new stainless Super304H and USC P92/T92 pipelines and HR3C and HR6W nickel based welding consumables.

Kobelco Welding Today Archive – KOBELCO WELDING

PREMIARC™ TG-Super304H: austenitic stainless steel TIG wire for coal-fired steam boilers. Technical Highlight Pipeline Girth Welding: Kobe Steel’s up-to-date welding consumables meet diverse requirements. 2012. Kobelco Welding Today Vol.15 No.3 2012. Products Spotlight

Utilities Perspective on Requirements for Oxy-fuel

SHTR / RHTR: T24, VM12, HR3C, Super304H . CCS Interests Post combustion Pilot scale amine scrubbing Wilhelmshaven PS, Germany 70 tonnes/day CO2 capture and release Demonstration scale amine scrubbing Maasvlakte, Netherlands 250 MW slipstream from new 1GW power plant (1.1 Mt CO 2


Technical university of Liberec Department of Engineering technology

Synthesis of Ultra-Incompressible Superhard Rhenium

Synthesis of Ultra-Incompressible Superhard Rhenium Diboride at Ambient Pressure Super304H Alloy 617 NF709 Commercial 347 Temperature for 100,000h rupture-life [oC] HTUPS 1 HTUPS 2 HTUPS 3 HTUPS 4 HTUPS ([ref.24]) Stress [MPa] 1Department of Chemistry and

C-25 MT304H rev 01 TIG only - Nickel Alloys

Rev 01 06/10 DS: C-25 (pg 2 of 2) MT304H Solid welding wire for TIG welding Product description Straight lengths and spooled wire for manual and automatic TIG/GTAW welding. Specifications There are no national specifications for this wire. ASME IX Qualification QW432 F-No -- , QW442 A-No --

voestalpine Böhler Welding - Industries - Power Generation

Thermal Power The development and production of welding consumables for heat and creep resistant steels for power plant applications are a focus of voestalpine Böhler Welding. Additionally we support fabricators with our deep experience in the processing of creep


Translate this page


BÖHLER ER 304 H Cu-IG - Alruqee Group

BÖHLER ER 304 H Cu-IG TIG rod, high-alloyed, stainless All information provided is based upon careful investigation and intensive research. However, we do not assume any liability for correctness and information is subject to change without notice.

AIREX T92 - CompositesWorld

pansion or out-gassing. T92 is designed for easy use with all resin systems and processing technologies. AIREX® T92 is ideally suited as a core material for a wide variety of lightweight sandwich structures subjected to static and dynamic loads and/or exposed to elevated tempera-tures during manufacturing.

The Effect of Boron on the Corrosion Resistance of

The Effect of Boron on the Corrosion Resistance of Austenitic Stainless Steels Article Citation: F. P. A. ROBINSON, W. G. SCURR, The Effect of Boron on the Corrosion Resistance of Austenitic Stainless Steels, CORROSION. 1977;33(11):408-417. Effects of Boron on Microstructure and Metastable Pitting Corrosion Behavior of Super304H

Published in: Corrosion · 1977Authors: F P A Robinson · W G ScurrAbout: Chemical reaction · Corrosion · Solid solution · Microstructure · Austenitic stainless steel

T92 Series Two-pole 30A PCB or Panel Mount Relay

3 11-2018, Rev. 1118 te © 2012 Tyco Electronics Corporation, a TE Connectivity Ltd. company. Catalog and product specification according to IEC 61810-1 and

Thermanit 304 H Cu - voestalpine

Super304H,DMV304HCu Structure Austenite Mechanical proper-ties of the weld metal according to EN ISO 15792-1 (min.valuesatRT) Heat- YieldstrengthYieldstrength Tensile Elongation Impactvalues treatment 0.2% 1.0% strength (L0=5d0) inJCVN MPa MPa MPa % AW 350 400 590 25 47 Welding instruction Materials Joiningonmatching/similar CrNi(N)-steels

Quality Matters PACE Technologies Newsletter

by Donald Zipperian, Ph.D. September 2003 PACE Technologies Etching - Enhancing Microstructures Etching Basics Considerations for chemical etching

super304h steel

SUPER304H is a trademark and brand of NIPPON STEEL & SUMITOMO METAL CORPORATION. Filed to USPTO On Friday, January 14, 2011, The SUPER304H covers Steel pipes and tubes. SA-213/ SUPER304H /S30432 Austenite Stainless Steel

Advanced Austenitic Heat-Resistant Steels for Ultra

Advanced Austenitic Heat-Resistant Steels for Ultra-Super-Critical (USC) Fossil Power Plants Chengyu Chi 1,2, Hongyao Yu 2 and Xishan Xie 2 Super304H and HR3C, have been successfully serviced as superheater/reheater tubes in 600 ( USC power plants all over the world. Fig.4(a), (b) and

Design and Operating Experience of the Latest 1,000

This paper summarizes the boiler design and operating experience during the commissioning. INTRODUCTION SUPER304H SUS321J1HTB: TEMPALOY A1 SUSTP347HTB: SA213TP347H 186 Design and Operating Experience of the Latest 1,000-MW Coal-Fired Boiler and quick start-up (Fig. 7) and shutdown and the boiler


Object Moved This document may be found here

稳定化处理对super304h奥氏体耐热钢晶间腐蚀敏感性的影响* -

Translate this page


Austenitic Stainless Steel Grades Comparison Chart

Austenitic Stainless Steel Grades Comparison Chart The table is intended to relate former BS, EN, German and Swedish grade designations to the current EN steel numbers, AISI grades and UNS numbers. The table is based on the 'wrought' ie long products (stainless steel bars etc), flat products (stainless steel plates etc) steel numbers published in EN 10088 and related standards.

super304h steel for Tula - pressure-vessel-steel

Home > pressure vessel>super304h steel for Tula. Product Categories. Carbon Steel. corten steel welding pdf. jis g 3101 ss400. s460n material. qste 340 steel. s335j2g3 steel us equivalent. material composition of C40. astm a537 cl 2. fe 410 s steel. astm gr 65 steel. ship ms plate. Alloy Steel. mechanical property of jsc270cc.

Tube/Pipe 06Cr19Ni10 S30400 304 1.4301 - steelheyi

Tube/Pipe 06Cr19Ni10 S30400 304 1.4301 2016-01-19 15:00:16 source: Comments: 0 click: Austenitic Stainless Steel Tube Pipe New GB Grade: 06Cr19Ni10 ASTM ASME Grade: 304 UNS Grade: S30400 EN Grade: 1 4301

Types 410, 420, 425 Mod, and 440A -

Types 410, 420, 425 Mod, and 440A exhibit good corrosion resistance to atmospheric corrosion, potable water, and to mildly corrosive chemical enviroments because of their ability to form a tightly adherent oxide film which protects their surfaces from further attack.

Weldability Analysis of T23 Material for Superheater Coil

Weldability Analysis of T23 Material for Superheater Coil 2 | Page Tungesten Inert Gas Welding

Published in: IOSR Journal of Mechanical and Civil Engineering · 2014Authors: N Jeyaprakash · R Prabhakaran · G Murugesan

Low Temperature Sensitization of Type 304 Stainless Steel

Low Temperature Sensitization of Type 304 Stainless Steel. M. J. POVICH. Effect of Shot Peening on the Intergranular Corrosion Susceptibility of a Novel Super304H Austenitic Stainless Steel. Low temperature sensitization of type 304 stainless steel pipe weld heat affected zone.


CCA617, HR6W, Super304H, RA333, and weld overlays inconel 622, 72, and 52. The loops were installed in January 2004 and were designed to operate at metal temperatures up to 1400°F (760 C) [Loop A] and 1280°F (693 C) [Loop B]. Operation of the loops has been hampered due

Low Temperature Grain Boundary Diffusion of

Low Temperature Grain Boundary Diffusion of Chromium in SUS316 and 316L Stainless Steels Masaki Mizouchi 1, Yoshihiro Yamazaki *, Yoshiaki Iijima and Koji Arioka2 1Department of Materials Science, Graduate School of Engineering, Tohoku University, Sendai 980-8579, Japan 2Institute of Nuclear Safety System, Incorporated, Mihama-cho, Fukui 919

Day 1 Mar 28, 2019 - scientificfederation

corrosion behavior of the Super304H austenitic stainless steel. Yan Gao, South China University of Technology, China. Title: Preparation and study of high performance La1-x Ndx CuOSe alloy thin film solutions. Zhang Nengduo, National University of Singapore.

Stainless Steel Seamless Tube/pipe - Buy Stainless Steel

Stainless Steel Seamless Tube/pipe , Find Complete Details about Stainless Steel Seamless Tube/pipe,Stainless Steel Tube from Stainless Steel Pipes Supplier

Austenitic Austenite Stainless Steel Tube Tubing - China

All the above stainless steel grades are basic variations of a 304. All are readily weldable and all have matching consumables, except for a 304 which is welded with a 308 or 316, 321 is welded with a 347 (Titanium is not easily transferred across the arc) and a 316Ti is normally welded with a 318.

Er19 10h Electrodes | Products & Suppliers | Engineering360

Find Er19 10h Electrodes related suppliers, manufacturers, products and specifications on GlobalSpec - a trusted source of Er19 10h Electrodes information.

Stainless Steel Grade Datasheets - Atlas Steels

stainless steel fasteners, ISO 3506, includes 302HQ as an acceptable composition for fastener grade “A2”; it is commonly produced in strength grades A2-70 and A2-80. The stable austenitic structure makes 302HQ non-magnetic, even after substantial cold work, and also results in excellent toughness,

Supporting the growth of special steel industry in China

T/P91+T/P92 TP347H Super304H+HR3C Total ~0.63milion tons~0.09million tons~0.25million tons~0.97million tons It needs tubes for turbine,tubes for unit

Simulation on the Thermal Stress of Super304H Oxidation

Simulation on the Thermal Stress of Super304H Oxidation Scale at 600°C p.1934. Study on Optimal Mix Proportion of PVA-ECC Based on Strength-Deformation-AHP p.1939. Study on the Durability of Concrete in the Northwest Alpine Region p.1945. Study on the Mix Proportion Design of C30 Supersulphated Phosphogysum-Slag Cement (SSC) Concrete


ASSESSMENT OF HIGH-ALLOYED CREEP RESISTANT MATERIALS Comparing of various types of Super304H / 316H steels that differed not only in their composition but also in their superficial state revealed that both oxide layers and their chemical composition differed, too. Differences in the contents of chromium and iron in the surface can

Precipitation Processes in Creep-Resistant Austenitic Steels

Grzegorz Golański, Adam Zieliński and Hanna Purzyńska (December 20th 2017). Precipitation Processes in Creep-Resistant Austenitic Steels, Austenitic Stainless Steels, Wojciech Borek, Tomasz Tanski and Zbigniew Brytan, IntechOpen, DOI: 10.5772/intechopen.70941. Available from:

Product Description:

shipbuilding steel stock

ABS,LR shipbuilding steel

steel for shipbuilding and oil platform:

Henan BEBON Iron & Steel Co., Ltd , is professional in exporting the steel for shipbuilding and oil platform. Our product have the following several feature
1.The size of steel plates we can supply is 3mm-180mm * 1250mm-4000mm * 3000mm-18000mm
2.The main standard our steel is according to ASTM A131,API.
3.The main classification society we cooperate are: ABS ,GL, LR, BV, NK,DNV,KR,RINA.
4.Productive technology: HR,CR,TMCP,N,Q&T,IMPACT TEST,Z15,Z25,Z35.
5.Hard stamp about the brand of manufacturer, Heat No.,Batch No., steel grade, steel size, and the brand of Classification Society.
6.Blasting according to SA2.5 standard, and the shop primed on the steel, coating thickness is 15-35 micrometer.

Get In Touch24/7 Support

We receive enquiries in English, Español (Spanish). Our professional team will reply to you within one business day. Please feel free to contact us!

Leave a Message Email: